1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/docs/features/mouse_keys.md
フィルターペーパー 21b84596e7
Enhance overlapping mouse keys control (#23341)
Enhance the overlapping mouse key press acceleration (introduced in #21494) with user preprocessor controls.
2024-08-19 03:18:28 +01:00

15 KiB
Raw Blame History

Mouse keys

Mouse keys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer at different speeds, press 5 buttons and scroll in 8 directions.

Adding mouse keys to your keyboard

To use mouse keys, you must at least enable mouse keys support and map mouse actions to keys on your keyboard.

Enabling mouse keys

To enable mouse keys, add the following line to your keymaps rules.mk:

MOUSEKEY_ENABLE = yes

Mapping mouse actions

In your keymap you can use the following keycodes to map key presses to mouse actions:

Key Aliases Description
QK_MOUSE_CURSOR_UP MS_UP Mouse cursor up
QK_MOUSE_CURSOR_DOWN MS_DOWN Mouse cursor down
QK_MOUSE_CURSOR_LEFT MS_LEFT Mouse cursor left
QK_MOUSE_CURSOR_RIGHT MS_RGHT Mouse cursor right
QK_MOUSE_BUTTON_1 MS_BTN1 Mouse button 1
QK_MOUSE_BUTTON_2 MS_BTN2 Mouse button 2
QK_MOUSE_BUTTON_3 MS_BTN3 Mouse button 3
QK_MOUSE_BUTTON_4 MS_BTN4 Mouse button 4
QK_MOUSE_BUTTON_5 MS_BTN5 Mouse button 5
QK_MOUSE_BUTTON_6 MS_BTN6 Mouse button 6
QK_MOUSE_BUTTON_7 MS_BTN7 Mouse button 7
QK_MOUSE_BUTTON_8 MS_BTN8 Mouse button 8
QK_MOUSE_WHEEL_UP MS_WHLU Mouse wheel up
QK_MOUSE_WHEEL_DOWN MS_WHLD Mouse wheel down
QK_MOUSE_WHEEL_LEFT MS_WHLL Mouse wheel left
QK_MOUSE_WHEEL_RIGHT MS_WHLR Mouse wheel right
QK_MOUSE_ACCELERATION_0 MS_ACL0 Set mouse acceleration to 0
QK_MOUSE_ACCELERATION_1 MS_ACL1 Set mouse acceleration to 1
QK_MOUSE_ACCELERATION_2 MS_ACL2 Set mouse acceleration to 2

Configuring mouse keys

Mouse keys supports three different modes to move the cursor:

  • Accelerated (default): Holding movement keys accelerates the cursor until it reaches its maximum speed.
  • Kinetic: Holding movement keys accelerates the cursor with its speed following a quadratic curve until it reaches its maximum speed.
  • Constant: Holding movement keys moves the cursor at constant speeds.
  • Combined: Holding movement keys accelerates the cursor until it reaches its maximum speed, but holding acceleration and movement keys simultaneously moves the cursor at constant speeds.
  • Inertia: Cursor accelerates when key held, and decelerates after key release. Tracks X and Y velocity separately for more nuanced movements. Applies to cursor only, not scrolling.

The same principle applies to scrolling, in most modes.

Configuration options that are times, intervals or delays are given in milliseconds. Scroll speed is given as multiples of the default scroll step. For example, a scroll speed of 8 means that each scroll action covers 8 times the length of the default scroll step as defined by your operating system or application.

Accelerated mode

This is the default mode. You can adjust the cursor and scrolling acceleration using the following settings in your keymaps config.h file:

Define Default Description
MOUSEKEY_DELAY 10 Delay between pressing a movement key and cursor movement
MOUSEKEY_INTERVAL 20 Time between cursor movements in milliseconds
MOUSEKEY_MOVE_DELTA 8 Step size
MOUSEKEY_MAX_SPEED 10 Maximum cursor speed at which acceleration stops
MOUSEKEY_TIME_TO_MAX 30 Time until maximum cursor speed is reached
MOUSEKEY_WHEEL_DELAY 10 Delay between pressing a wheel key and wheel movement
MOUSEKEY_WHEEL_INTERVAL 80 Time between wheel movements
MOUSEKEY_WHEEL_DELTA 1 Wheel movement step size
MOUSEKEY_WHEEL_MAX_SPEED 8 Maximum number of scroll steps per scroll action
MOUSEKEY_WHEEL_TIME_TO_MAX 40 Time until maximum scroll speed is reached

Tips:

  • Setting MOUSEKEY_DELAY too low makes the cursor unresponsive. Setting it too high makes small movements difficult.
  • For smoother cursor movements, lower the value of MOUSEKEY_INTERVAL. If the refresh rate of your display is 60Hz, you could set it to 16 (1/60). As this raises the cursor speed significantly, you may want to lower MOUSEKEY_MAX_SPEED.
  • Setting MOUSEKEY_TIME_TO_MAX or MOUSEKEY_WHEEL_TIME_TO_MAX to 0 will disable acceleration for the cursor or scrolling respectively. This way you can make one of them constant while keeping the other accelerated, which is not possible in constant speed mode.
  • Setting MOUSEKEY_WHEEL_INTERVAL too low will make scrolling too fast. Setting it too high will make scrolling too slow when the wheel key is held down.

Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it on Wikipedia.

Kinetic Mode

This is an extension of the accelerated mode. The kinetic mode uses a quadratic curve on the cursor speed which allows precise movements at the beginning and allows to cover large distances by increasing cursor speed quickly thereafter. You can adjust the cursor and scrolling acceleration using the following settings in your keymaps config.h file:

Define Default Description
MK_KINETIC_SPEED undefined Enable kinetic mode
MOUSEKEY_DELAY 5 Delay between pressing a movement key and cursor movement
MOUSEKEY_INTERVAL 10 Time between cursor movements in milliseconds
MOUSEKEY_MOVE_DELTA 16 Step size for accelerating from initial to base speed
MOUSEKEY_INITIAL_SPEED 100 Initial speed of the cursor in pixel per second
MOUSEKEY_BASE_SPEED 5000 Maximum cursor speed at which acceleration stops
MOUSEKEY_DECELERATED_SPEED 400 Decelerated cursor speed
MOUSEKEY_ACCELERATED_SPEED 3000 Accelerated cursor speed
MOUSEKEY_WHEEL_INITIAL_MOVEMENTS 16 Initial number of movements of the mouse wheel
MOUSEKEY_WHEEL_BASE_MOVEMENTS 32 Maximum number of movements at which acceleration stops
MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS 48 Accelerated wheel movements
MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS 8 Decelerated wheel movements

Tips:

  • The smoothness of the cursor movement depends on the MOUSEKEY_INTERVAL setting. The shorter the interval is set the smoother the movement will be. Setting the value too low makes the cursor unresponsive. Lower settings are possible if the micro processor is fast enough. For example: At an interval of 8 milliseconds, 125 movements per second will be initiated. With a base speed of 1000 each movement will move the cursor by 8 pixels.
  • Mouse wheel movements are implemented differently from cursor movements. While it's okay for the cursor to move multiple pixels at once for the mouse wheel this would lead to jerky movements. Instead, the mouse wheel operates at step size 1. Setting mouse wheel speed is done by adjusting the number of wheel movements per second.

Constant mode

In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. MS_ACL0, MS_ACL1 and MS_ACL2 change the cursor and scroll speed to their respective setting.

You can choose whether speed selection is momentary or tap-to-select:

  • Momentary: The chosen speed is only active while you hold the respective key. When the key is raised, mouse keys returns to the unmodified speed.
  • Tap-to-select: The chosen speed is activated when you press the respective key and remains active even after the key has been raised. The default speed is that of MS_ACL1. There is no unmodified speed.

The default speeds from slowest to fastest are as follows:

  • Momentary: MS_ACL0 < MS_ACL1 < unmodified < MS_ACL2
  • Tap-to-select: MS_ACL0 < MS_ACL1 < MS_ACL2

To use constant speed mode, you must at least define MK_3_SPEED in your keymaps config.h file:

#define MK_3_SPEED

To enable momentary mode, also define MK_MOMENTARY_ACCEL:

#define MK_MOMENTARY_ACCEL

Use the following settings if you want to adjust cursor movement or scrolling:

Define Default Description
MK_3_SPEED Not defined Enable constant cursor speeds
MK_MOMENTARY_ACCEL Not defined Enable momentary speed selection
MK_C_OFFSET_UNMOD 16 Cursor offset per movement (unmodified)
MK_C_INTERVAL_UNMOD 16 Time between cursor movements (unmodified)
MK_C_OFFSET_0 1 Cursor offset per movement (MS_ACL0)
MK_C_INTERVAL_0 32 Time between cursor movements (MS_ACL0)
MK_C_OFFSET_1 4 Cursor offset per movement (MS_ACL1)
MK_C_INTERVAL_1 16 Time between cursor movements (MS_ACL1)
MK_C_OFFSET_2 32 Cursor offset per movement (MS_ACL2)
MK_C_INTERVAL_2 16 Time between cursor movements (MS_ACL2)
MK_W_OFFSET_UNMOD 1 Scroll steps per scroll action (unmodified)
MK_W_INTERVAL_UNMOD 40 Time between scroll steps (unmodified)
MK_W_OFFSET_0 1 Scroll steps per scroll action (MS_ACL0)
MK_W_INTERVAL_0 360 Time between scroll steps (MS_ACL0)
MK_W_OFFSET_1 1 Scroll steps per scroll action (MS_ACL1)
MK_W_INTERVAL_1 120 Time between scroll steps (MS_ACL1)
MK_W_OFFSET_2 1 Scroll steps per scroll action (MS_ACL2)
MK_W_INTERVAL_2 20 Time between scroll steps (MS_ACL2)

Combined mode

This mode functions like Accelerated mode, however, you can hold MS_ACL0, MS_ACL1 and MS_ACL2 to momentarily (while held) set the cursor and scroll speeds to constant speeds. When no acceleration keys are held, this mode is identical to Accelerated mode, and can be modified using all of the relevant settings.

  • MS_ACL0: This acceleration sets your cursor to the slowest possible speed. This is useful for very small and detailed movements of the cursor.
  • MS_ACL1: This acceleration sets your cursor to half the maximum (user defined) speed.
  • MS_ACL2: This acceleration sets your cursor to the maximum (computer defined) speed. This is useful for moving the cursor large distances without much accuracy.

To use combined speed mode, you must at least define MK_COMBINED in your keymaps config.h file:

#define MK_COMBINED

Inertia mode

This mode provides smooth motion, like sliding on ice. The cursor accelerates along a quadratic curve while a key is held, then glides to a stop after the key is released. Vertical and horizontal movements are tracked independently, so the cursor can move in many directions and make curves.

Cannot be used at the same time as Kinetic mode, Constant mode, or Combined mode.

Recommended settings in your keymaps config.h file:

Define Default Description
MOUSEKEY_INERTIA undefined Enable Inertia mode
MOUSEKEY_DELAY 150 Delay between pressing a movement key and cursor movement
MOUSEKEY_INTERVAL 16 Time between cursor movements in milliseconds (16 = 60fps)
MOUSEKEY_MAX_SPEED 32 Maximum cursor speed at which acceleration stops
MOUSEKEY_TIME_TO_MAX 32 Number of frames until maximum cursor speed is reached
MOUSEKEY_FRICTION 24 How quickly the cursor stops after releasing a key
MOUSEKEY_MOVE_DELTA 1 How much to move on first frame (1 strongly recommended)

Tips:

  • Set MOUSEKEY_DELAY to roughly the same value as your host computer's key repeat delay, in ms. Recommended values are 100 to 300.
  • Set MOUSEKEY_INTERVAL to a value of 1000 / your monitor's FPS. For 60 FPS, 1000/60 = 16.
  • Set MOUSEKEY_MAX_SPEED based on your screen resolution and refresh rate, like Width / FPS. For example, 1920 pixels / 60 FPS = 32 pixels per frame.
  • Set MOUSEKEY_TIME_TO_MAX to a value of approximately FPS / 2, to make it reach full speed in half a second (or so).
  • Set MOUSEKEY_FRICTION to something between 1 and 255. Lower makes the cursor glide longer. Values from 8 to 40 are the most effective.
  • Keep MOUSEKEY_MOVE_DELTA at 1. This allows precise movements before the gliding effect starts.
  • Mouse wheel options are the same as the default accelerated mode, and do not use inertia.

Overlapping mouse key control

When additional overlapping mouse key is pressed, the mouse cursor will continue in a new direction with the same acceleration. The following settings can be used to reset the acceleration with new overlapping keys for more precise control if desired:

Define Default Description
MOUSEKEY_OVERLAP_RESET undefined Enables overlapping mouse key control
MOUSEKEY_OVERLAP_MOVE_DELTA MOUSEKEY_MOVE_DELTA Step size of reset movement acceleration
MOUSEKEY_OVERLAP_WHEEL_DELTA MOUSEKEY_WHEEL_DELTA Step size of reset mouse wheel acceleration
MOUSEKEY_OVERLAP_INTERVAL MOUSEKEY_INTERVAL Reset time between cursor movements in milliseconds (Kinetic mode only)

?> This feature will not be applied on Inertial mode

Use with PS/2 Mouse and Pointing Device

Mouse keys button state is shared with PS/2 mouse and pointing device so mouse keys button presses can be used for clicks and drags.