forked from forks/qmk_firmware
1.3 KiB
1.3 KiB
lemonpad
This is a QMK and VIA implementation for an atmega32u4 based adaptation of the Adafruit Lemon Keypad. By default it uses a Pro Micro, if you would like to use a different microcontroller please make sure you have the correct bootloader set.
- Keyboard Maintainer: dari-studios
- Hardware Supported: atmega32u4 based boards with the Caterina bootloader
- Hardware Availability: https://learn.adafruit.com/qtpy-lemon-mechanical-keypad-macropad
Make example for this keyboard (after setting up your build environment):
make handwired/lemonpad:default
Flashing example for this keyboard:
make handwired/lemonpad:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESETif it is available