varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/quantum/template/ps2avrgb/readme.md
Drashna Jaelre a0f2be18a4
Add bootloader section to keyboard template (#13774) 
* Add bootloader section to keyboard template

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-08-04 01:23:18 +01:00

1.4 KiB
Raw Blame History

%KEYBOARD%

![%KEYBOARD%](imgur.com image replace me!)

A short description of the keyboard/project

  • Keyboard Maintainer: %YOUR_NAME%
  • Hardware Supported: The PCBs, controllers supported
  • Hardware Availability: Links to where you can find this hardware

Make example for this keyboard (after setting up your build environment):

make %KEYBOARD%:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make %KEYBOARD%:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • BootloadHID reset: Hold down the key connected to the A0 and B0 pins on the MCU if it is known (often top left or bottom left) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available