* Add pteron44
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review part 2
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add my own keymap
* Layer 0: Workman
* Layer 1: RSTHD (my own take on it)
* Layer 2: Mouse
* Layer 3: Navigation
* Layer 4: Symbols right
* Layer 5: Symbols left
* Layer 6: Fn keys
* Layer 7: Numbers
* Layer 8: Vim and misceallaneaous accessible from any other layer
* Move the current code to a 0.1 folder in preparation for upcoming changes
Version 0.2 is currently being prototyped and uses an arm chip which
will need its own firmware.
There is also the Ferris sweep which uses a pro-micro compatible board
which will need its own directory.
* Move Ferris out of handwired and into the light
The keyboard is now well out of the prototype phase as tens of them have
been produced and acquired by various people.
With 0.2 coming out, adoption is going to increase again as the board
will be available for sale at some recognized vendors.
Now is probably a good time to recognize its status as more than a
prototype :)
* Add code for the Ferris Sweep (a.k.a cradio)
The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB.
It has the key layout of a Ferris and uses a pro-micro connected to the
switches via direct pins so that diodes are not needed and the soldering
is minimal.
With their blessing, I took the code for it from DPB's own repo:
https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio
and did some adaptations such as removing commented out code, enabling
EE_HANDS and mouse keys for consistency with my existing Ferris code.
* Fix indentation in rules.mk
* Fix indentation in sweep's config
* Remove unnecessary lines from sweep's rules.mk
* Remove unnecessary lines from sweep's rules.mk
* Rename 0.1 to 0_1
This avoids the dot looking like the separation between a filename and
its extension.
In the same commit, bring matrix.c to the 0_1 folder as this was needed
for the code to compile properly (matrix.c is referred to in the readme
under `0_1` and is specific to that revision of the firmware).
* Update copyright statements for Sweep
* Clean LeftyNumpad code
* Fix typo in recently renamed file
* Fix issues with keymap layout
* Initial PR Feedback fixes
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add fixes based on PR feedback
* Update keyboards/handwired/leftynumpad/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Basic keymap parsing finally works
* Add 'keymap.json' creation to the qmk.keymap module
* Add tests and fix formatting
* Fix/exclude flake8 errors
* Convert keymap.c to valid keymap.json
* Fix some errors
* Add tests
* Finalize keymap.json creation, add json template
* Add docs
* Move pygments to the standard requirements
* Add support for nameless layers, fix tests
* Fix things after rebase
* Add missing 'keymap' value.
* Fix missing layer numbers from advanced keycodes
Buckwich noticed that if the advanced keycode / layer toggling key
contains a number, it goes missing.
Now we properly handle them.
Thx for noticing!
* Apply suggestions from code review
* fixup tests
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: skullY <skullydazed@gmail.com>
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality
* Move keymaps to community layouts
* Remove keymaps from userspace readme.md
Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Create keymap.c
* Add files via upload
* Added files for handwired 3d printed clueboard 660
* create via layout files
* added layout files for via
* updated product ID to fix id conflicts
* change product ID to fix ID conflicts.
* fixed capitalization error that was causing issues
* fixed capitalization issues.
* fix syntax errors
* Fixed syntax errors (stray punctuation)
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* capitalization fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility Fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility changes
* upkeep, fixing typos
* Update keyboards/handwired/3dp660/config.h
Removed Description line
* Update keyboards/handwired/3dp660/rules.mk
correct bootloader
* Update keyboards/handwired/3dp660/3dp660.h
fix case sensitive typos
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
change tab indentation to space indentations.
* Update keyboards/handwired/3dp660/keymaps/via/keymap.c
change tab indentations to space indentations
* Delete 3dp660.json
This file was for VIA, and shouldn't be in this repo. I placed it here so I wouldn't misplace it in my filesystem. My apologies.
* Update info.json
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
more capitalization fixes
* Update keyboards/handwired/3dp660/readme.md
shortened imgur url
* Update keyboards/handwired/3dp660/rules.mk
remove extraneous comments
* Delete config.h
* Update keyboards/handwired/3dp660/rules.mk
* Update 3dp660.c
add license headers to all .c and .h files
* Update 3dp660.h
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keyboards/handwired/3dp660/readme.md
Add maintainer URL
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
remove extraneous default keymap layers
* Update keyboards/handwired/3dp660/keymaps/default/rules.mk
* Update rules.mk
Moved LTO to keyboard level.
* Update rules.mk
Moved LTO to keyboard level.
* Delete rules.mk
Made obsolete by LTO move to keyboard level.
* Update keyboards/handwired/3dp660/rules.mk
capitalization errors.
* Apply suggestions from code review
Housekeeping, changing code for readability.
Fix configs to make the `handwired/onekey/blackpill_f401:backlight` and
`handwired/onekey/blackpill_f411:backlight` examples actually compile
and work:
- Use `PWMD5` instead of `PWMD2` for backlight, which matches the
default value of `BACKLIGHT_PAL_MODE` (AF02 for pin A0 is `TIM5_CH1`)
and does not conflict with the default value of `STM32_ST_USE_TIMER`.
- Enable `HAL_USE_PWM` in halconf.h and `STM32_PWM_USE_TIM5` in
mcuconf.h, so that `PWMD5` could be used.
There is no way to invoke the command feature while having just a single
physical key, and disabling that feature fixes build for keymaps like
`handwired/onekey/promicro:rgb` without resorting to LTO (the command
feature consumes more than 4900 bytes with avr-gcc 8.4.0).
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read
* Incorporates patches and changes to HID reporting
There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.
The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:
```
bits |0|1|2|3|4|5|6|7|
|*|*|*|*|*|*|*|*| axis 0 (report size 8)
|*|*|*|*|*|*|*|*| ...
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*| axis 6
|*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
|*| | | | | | | | last of 9 buttons, not aligned
```
So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.
Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)
* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.
Fix joystick report id
Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)
Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.
Documentation fixes
* Fix port addressing for joystick analog read
* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat
* avoid float functions to compute range mapping for axis adc reading
* Remove V-USB support for now. Updated docs accordingly.
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios
* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.
* Update tmk_core/protocol/chibios/usb_main.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.
* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add PR corrections
* Remove halconf.h and mcuconf.h from onekey keymaps
* Change ADC_PIN to A0
Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial work for consolidation of board files and default ChibiOS configs.
* Migrate F401/F411 black pills for testing.
* Add early init bootloader jump flag.
* Add support for I2C in order to use i2c_scanner keymap.
* Add F401/F411 HSE bypass to get things booting.
* Exempt "hooked" ChibiOS conf files from updater script.
* Fix up ordering for bootloader_defs file check.
* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
* setup handwired pteron38
* Clean up readme
* readme follow template
* c formatting conventions
* remove file size comments from rules.mk
* use direct link to imgur image
* Apply suggestions from code review
* add license
* cleaning up
* got some working bones
* working pretty well
* really livin' now
* all done
* copyright adjustments
* default keymap
* readme
* no descrip
* remove trailing slashes
* remove blank line
* remove trailing slashes
* clean up readme
* clean up rules spacing
* bootloader spacing
* made quick json from KLE converter
* remove postageboard mini references
* add actual manu and product values
* add make example
* rework
* remove double bootload define
* smoller image
* liscensed
* correct dimensions
* dimensions
* Added handwired/selene based on handwired/106_with_trackpoint
* now at least parially working
* Selene Firmware 1, ready
* Updated Readme to align more with Template
* Added URL to info.json
* Fix status Lights being wired incorrectly
* Update keyboards/handwired/selene/config.h
* Update keyboards/handwired/selene/keymaps/Bpendragon/keymap.c
* Update keyboards/handwired/selene/selene.c
* Update keyboards/handwired/selene/selene.h
* Changes for PR requested by fauxpark
* Adds `default` keymap
* Renames `Bpendragon` to `bpendragon`
* Removes uneeded descriptors and options
* Simplifies return statement in `keymap.c`
* Removes trailing slashes from layout in `keymap.c`
* Updates `readme.mk` to reflect default keymap
* Aligns comments in `rules.mk`
* Forced folder name update to lowercase
* Apply suggestions from code review
* Added a new handwired 2x3,2x4,2x5 keyboard called the Stream_cheap
stream cheap is a diy version of the El Gato Stream deck minus the LCD keys
but you can always get relegendable keycaps to change the icon if you want
* added missing commas in info.json files
* update config to change pin definition
* changed keymap.c for 2x4
was trying to add macros and multi key commands to the keymap,
i added 2 ctrl commands that have more than one key i.e. ctrl-k-c (visual studio comment hot key)
and i added a test string to see how type out a string with the press of a button
* testing more changes to the keymap to the 2x5
* Update keyboards/handwired/stream_cheap/2x3/2x3.c
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/rules.mk
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/info.json
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x4/keymaps/default/keymap.c
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/rules.mk
* Update keyboards/handwired/stream_cheap/2x4/2x4.c
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x5/2x5.c
* Update keyboards/handwired/stream_cheap/2x4/rules.mk
* removed file as per request of user zvecr
* removed line in rules.mk for 2x5
* Update keyboards/handwired/stream_cheap/2x5/keymaps/default/keymap.c
* Apply suggestions from code review
changes suggested in code review
* I2C_TIMEOUT is not defined on arm teensy
* Work round teensy having different ChibiOS config options
* Stash OLED conf files
* update comment
* update comment
* Remove stm32 alias to allow teensy alt mode
* adding via support for Dactyl Manuform 5x7
* Changing Vendor ID from FEED to 444D (DM)
* Update keyboards/handwired/dactyl_manuform/4x6/config.h
Fixing typo in Dactyl Manuform 4x6 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/dactyl_manuform/4x5/config.h
Fixing typo in Dactyl Manuform 4x5 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Roland Bernau <roland@bernau.dev>
Co-authored-by: Joel Challis <git@zvecr.com>
* Write firmware for the Ferris keyboard
Took inspiration from the gergoplex and the ergodox_ez firmware for the
split matrix with io_expander on the right hand.
Cleaned up a lot of bit fiddling on the mcu side by taking inspiration
from the `split_custom` in quantum.
Still bit fiddling on the mcp side as it is particularly natural to do
so with the abstractions provided by the i2c protocol. Would be good to
clean that up and abstract away the wiring from the generic i2c code in
a similar fashion as quantum and the mcp side behave.
One improvement over the ergodox_ez and the gergoplex firmwares is that
the wiring is straight forward as opposed to swapping rows and columns
in two different places that end up cancelling out for some reason.
At this stage, I have flashed this firmware to a board and have verified
that all keys are behaving as intended by shorting pins.
I still have to solder in some switches and test that everything works
correctly at normal typing speeds, but I don't expect any major issues
given I'm building up on previous effort, including the debouncing code
from the ergodox_ez.
* Remove rotation from info.json and label the keys as per default keymap
* Comply with minor review feedback points
* Use CUSTOM_MATRIX=lite to remove boilerplate
* Update keyboards/handwired/ferris/info.json
Didn't play nicely in the configurator
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove MIDI_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove FAUXCLICKY_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Prefer wait_ms over _delay_ms
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused includeh
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use dprint over print and remove include for print.h
* Remove all unused includes
* Remove unused code
* Cleanups thanks to code review
* Move more personal settings from the ferris config to the default keymap config
These setting happen to be unused in the default keymap at the moment,
as it has only one layer with no homerow modifiers and no mouse key; but
I would like to keep it there for two reasons:
* It can serve as an example to people creating their own keymap
* I plan to design a more usable default keymap that uses these features
once this PR which adds the Ferris keyboard is merged.
* Consolidate mcp logic inside matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added Handwired Redragon Keyboard as well as default and via keymaps
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keymap.c
Removed defined keycodes from via keymap
* Update keymap.c
replaced defined keycodes in default keymap
* Update readme.md
Changed image to one that matches the physical keyboard
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* [Keyboard] Added D48 keyboard.
* Updated README.
* Cleanups.
* Moved d48 to handwired/
* Added link to build process album.
* Coding conventions cleanups.
* Added DS1307 RTC!
* Minor cleanups.
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Minor refactoring.
* Readme fix.
* Moved leftover keymap-specific code from keyboard space into keymap.
* Added encoder button pins to extra matrix row.
* Updated README, updated pinout & cleaned up the glcdfont
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update config.h
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Added default keymap. Refactored existing keymap.
* Update keyboards/handwired/d48/README.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* Minor alignment fix.
* Update keyboards/handwired/d48/glcdfont_d48.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes as per PR.
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update to xealousbrown.
5-13ms Latency decrease, 4x scan rate improvement.
(CUSTOM_MATRIX = lite) is a really great feature!
* Updated Readme.md, added an extra speedhack.
* More optimizations
* Update keyboards/handwired/xealousbrown/rules.mk
* Update keyboards/handwired/xealousbrown/rules.mk
* Adding Novem keyboard (macropad) and demo layout
* Making changes suggested during pull request
* Removing keyboards/novem/keymaps/default/config.h as suggested during the pull request
* Moving keyboard to the handwired folder and changing the build line from readme in order to reflect this new location
* Add handwired BDN9-BLE
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Set backlight and RGB pins for AVR onekeys
* Set pin for ADC as well
* Define ADC_PIN for F4 blackpills
* Use A0 for F4 ADCs
* Set ADC pins for F0 and F1
* Update switch to array to allow custom values
* Add adc keymap
* update docs to reflect alignment of default 10 bit
* start conversion to USE_ADCVn
* samplerate is hella wrong...stub out for now
* basic f1 and f4 functionality
* Tidy up current changes
* Restore old pinToMux function
* Add back sample rate for supported platforms
* F0 compile fixes
* wordsmithery
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Remove reference to avr only function
Co-authored-by: Ryan <fauxpark@gmail.com>
* adding Handwired Skeeb Keyboard
* Apply suggestions from fauxpark
* Apply more suggestions from fauxpark and small change to layout
* Apply more suggestions from noroadsleft and last tap dance
* to ease the maintenance for some boards ibnuda has.
* followed ridingqwerty's suggestion on 8821.
* folloing drashna's suggestion on qmk's 8221.
* following drashn's suggestion on qmk's 8211
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* Ensure setPinInput actually sets input high-z
* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan
* Fixed instances of setInput to use new behavour
* Changed kmac matrix to use input with pullups
* Update keyboards/gh60/revc/revc.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fixed input state for unselect_rows
* fixed merge conflict
* Updated all instances of older uses of setPinInput()
* Fixed naming mistake
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards
* Define diode direction for failing boards
* Matching parentheses
* Put onekey diode directions in top level config
* Add: RGB underglow support using SPI to SteamVan and CO60
* Update: Switch to QMK's baclight implementation for CO60 and SteamVan
* Fix: Remove now unnecessary backlighting code from keyboard files
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'
* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'
* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
* VIA Refactor
* Remove old code
* review changes
* review changes
* Fix cannonkeys/satisfaction75/prototype:via build
* Add via.h to quantum.h
* Move backlight init to after backlight config load
* Merge branch 'master' into via_refactor_pr
* Update user's rules.mk to new way of enabling VIA
* Added id_switch_matrix_state
* Review changes
* Aranck now supports community MIT layouts, also minor optimisations done
* Update keyboards/handwired/aranck/keymaps/turkishish/readme.md
* Update keyboards/handwired/aranck/readme.md
* Initial commit for K-Nunmpad
* Changed layoutname
Corrected the files according to drashnas suggestions.
* Some names have been changed
* Some code thats not been used has been removed
* Fixed rules.mk
When adding the commnity layout, tapdancing broke. This was fixed with
rules.mk was changed in the k-numpad and karlssn keymap.
* Cleanup according fauxpark
Cleaned up the readme.md and the rules.mk according to feedback from
fauxpark.
* Set proper AVR part for USBasp avrdude flashing
* Remove `PROGRAM_CMD` stuff from rules.mk as they should not be needed anymore
* Missed the Plaid readme
* Remove PROGRAM_CMD from Mysterium
* Added my Dactyl Manuform layout
* Added my Dactyl Manuform layout
* finalized key layout, added reset code, no LED yet
* finalized key layout, added reset code, no LED yet
* enabled RGB backlight
* enabled RGB backlight
* enabled RGB backlight
* supporting split rgb
* supporting split rgb
* supporting split rgb
* added media controls
* allowing ctrl/command to fallthrough from mouse layer so we can ctrl scroll to zoom in/out
* addressed PR comments, and make a couple last minute adjustments to the layout, to add in the Forwards Delete keycode
* decreased brightness even more
* added cans12er keyboard
* updated readme
Updated the readme to conform with the provided template from the qmk_firmware githubpage
* Update keyboards/cans12er/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed configuration
Changed the configuration based on the Change Request from PR #7455 made by github user noroadsleft
* Remove keymap_config extern from default keymaps
* Revert unicode
Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :(
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Added new 2x5 Keypad with 3 LEDs to indicate the selected layer. By Jonathan Cameron.
* Minor refactor from suggestions from qmk team
* Added
* Moved to 'handwired' directory
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/handwired/2x5keypad/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Switch to image offsite
* Moved image offsite
* Update keyboards/handwired/2x5keypad/keymaps/default/keymap.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved functions into .c file per suggestions
* Cosmetic
* Fixed function called, per suggestions.
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Ok
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved LED functions to the top level since they can be used it various flavors
* Declare those moved LED functions!
* Update keyboards/handwired/2x5keypad/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* First cut at French support
* Added French layer (green) for accented and special French characters
* Added french layer
* Fixed typo
* Updated to get more reasonable tap function
* Initial ARM bitbang ws2812 driver
* Unify chibios platform to run rgblight_task
* Remove 'avr only' comments from ws2812 docs
* Remove 'avr only' comments from ws2812 docs
* Unify chibios platform to run rgblight_task - review comments
* Remove debug flags from keymap
* Add comments from review
* Add defines for STM32L0XX
* Attempt to get arm ws2812 working on multiple gcc versions
* feat(slash): added slash keyboard
* fix(slash): fixed typo in readme
* Improvements after review
* disabled debug and print to reduce firmware size
* Fixes after review
* fixed hardware list in readme.md
* initial commit
* README
* Unique id
* info.json
* layotus
* br
* Move to handwired
* cleanup
* Disable command for fruity out of flash space
* Old compiler
turn off command
* Setup keymaps and userspace for Rishka
* Creates a keymap for Ergodox Ez, bdn9 and Dactyl Manuform 5x6
* Update bdn9 config with suggested change
* Add pragma to other header files
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Updates from review from fauxpark
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Add missing change from review
* Avoid NO_USB_STARTUP_CHECK - Disable USB as checks seem to enable it somehow
* Update quantum/split_common/split_util.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Also remove NO_USB_STARTUP_CHECK from vitamins_included/rev1
* [keymap] dactyl_left
Special layout for the left side of the ergodox dactyl.
* [keymap] dactyl_left
Special layout for the left side of the ergodox dactyl.
* Updated readme.md
* Update keyboards/handwired/dactyl_left/readme.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/readme.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Addressing changes for PR
removed layers.json and 15-24 from rules.mk
* Updating keymap for better a default
Hopefully this works as a starting point
* first commit, skeleton code, not sure if working
* Owlet 60 working firmware, json not sure
* use json from kle to qmk converter
* deleted temporary text from owlet60.h
* owlet60 working oled and led firmware
* moved owlet60 to handwired
* updated readme.md
* Revert "owlet60 working oled and led firmware"
This reverts commit 27f9465aab.
* Revert "moved owlet60 to handwired"
This reverts commit 9b8e8344fc.
* revert changes, moved owlet60 to handwired, updated copyright blurb
* fixed readme.md
* removed duplicate items
* resolve merge artifact
* Update keyboards/handwired/owlet60/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* check out merge artifacts with qmk master
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* removed redundant rule on oled_testing/rules.mk, refactored mux switching code on matrix.c
* Added new 2x5 Keypad with 3 LEDs to indicate the selected layer. By Jonathan Cameron.
* Minor refactor from suggestions from qmk team
* Added
* Moved to 'handwired' directory
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/handwired/2x5keypad/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Switch to image offsite
* Moved image offsite
* Update keyboards/handwired/2x5keypad/keymaps/default/keymap.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved functions into .c file per suggestions
* Cosmetic
* Fixed function called, per suggestions.
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Ok
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved LED functions to the top level since they can be used it various flavors
* Declare those moved LED functions!
* Update keyboards/handwired/2x5keypad/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
* Refactor splittest to support multiple dev boards
* Refactor splittest to support multiple dev boards - revert change to number of RGB led
* Refactor splittest to support multiple dev boards - update docs
* Refactor splittest to support multiple dev boards - correct docs
* Refactor splittest to support multiple dev boards - update teensy master logic
* Remove the need to set NUM_OF_ENCODERS
Instead, calculate the size of the array, and use that instead
* Add hack for split common support
* Remove NUM_OF_ENCODERS from keyboard config
Can be reverted, if needed
* added handwired keyboard wulkan
* added info.json for qmk configurator
* fixed spelling
* enum dont need to be assigned to zero
* removed cflag from readme
* updated rules.mk
* removed unneeded rows from config
* moved unicode to keymap conf
* fix adjust layer and comments for keymap
* Initial refactor of onekey to support multiple development boards
* Fixes to get teensy lc && 3.2 working
* Add pin tables
* Add caveats to Teensy boards
* Correct bootloader for Elite-C
* added keyboard_layout_jopr
* making it compile
* #pragma once instead of #ifndef and #define
* renamed and added keymap
renamed old "default" to "modded_white", added new "default" that resembles an ISO 105-key layout
* reordered keyboards/jopr/info.json to match order o layout array
* implemented most suggestions
* fixed missing ;
* fixed bootloader setting for rules.mk
* adopted standard layout matrix naming convention
* "fixed" commented-out code in keymaps
* changes to keymap layers and LEDs
Turns out adding a layer for ROYA-modified keycodes is more trouble than it's worth and works better by just defining a ROYA key.
Also, LEDs were set up incorrectly.
Lastly, implemented SysReq-Warning LED.
* moved forced NumLock code
just in case either it or the CapsLock & ScrlLock update code wouldn't both work otherwise
* rearranged media keycodes
* replaced Shifted keycodes with basic ones
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* implemented suggestions by noroadsleft
* Apply suggestions from code review
Make ISO-Enter QMK Configurator-friendly
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update readme.md
* Update keyboards/jopr/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* moved keyboard to handwired folder
It was said that personal passion projects belong in there, even if they're not actually handwired
* Update readme.md
* Update code for compatibility with latest QMK
* Added compatibility with Planck rev6
* use wait_ms instead of _delay_ms
* removed unnecessary rules
* disable audio on rev4 only
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
* Added first configuration for handwired hacked motosped keyboard
* Added first keymap
* Fixed h file key layout
* Swapped Y and Z in default keymap
* Added name, email and description
* Moved hacked motospeed keyboard to handwired
* Changed make command in readme
* Formatted readme to be displayed properly with markdown
* Formatted keymap and layout to better reflect the physical keyboard
* Fixed info.json
* Update keyboards/handwired/hacked_motospeed/info.json
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Removed .directory from .gitignore
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Minor changes and cleanup
* Update keyboards/handwired/hacked_motospeed/hacked_motospeed.h
Added back newline needed for properly parsing
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Add tennie
* Jacobs Functions
* Switch back to normal layout
* Remove define from old template
* Fix broken keymaps
* Correct style errors, add bootlite
* Update readmes. Rename test keymap
* Missed comma
* Switch rgb from init to post init
* Fixed typo of 'confid.h' to 'config.h'
* Fixed broken links in docs
* Fixed a lot of dead links
* Removed all dead links that I could not find a replacement for
* Placed knops links back in
* Fixed plank keymaps so that they will compile for planck light
* Https doesn't work on knops.io
* tv44:budi now compiles
* s60_x:amnesia0287 now compiles
* Fixed allocation of key_combos so that narze keymap for planck can compile correctly
* Disabled rgb on ergodone and infinity
* Enabled tap dance so it compiles
* Added return statement so it compiles
* If compiling on light disable extra functionality
* Properly redefined variable so it compiles
* Remove remaining dead links
