Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Python will evaluate first the left and then the right side of the and operator.
The left side would previously return True based on the truthiness logic that treats any non-emptry string as true.
It would not check if the desired keymap exists.
If the left side is true it will evaluate the right side which will check for the existance of a specific keymap.
With this change the check for existance of two keymaps is implemented.
* Tentative Teensy 3.5 support
* Set firmware format to .hex for ARM Teensys
* Got to "device descriptor failed" by comparing with Teensy 3.6 code
* Drop down to 96MHz...
* Bump back up to 120MHz
* Disable RESET keycode because of naming conflicts
* Add Pico SDK as submodule
* Add RP2040 build support to QMK
* Adjust USB endpoint structs for RP2040
* Add RP2040 bootloader and double-tap reset routine
* Add generic and pro micro RP2040 boards
* Add RP2040 onekey keyboard
* Add WS2812 PIO DMA enabled driver and documentation
Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.
* Adjust SIO Driver for RP2040
* Adjust I2C Driver for RP2040
* Adjust SPI Driver for RP2040
* Add PIO serial driver and documentation
* Add general RP2040 documentation
* Apply suggestions from code review
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Install dependencies before executing unit tests.
* Split out UTF-8 decoder.
* Fixup python formatting rules.
* Add documentation for QGF/QFF and the RLE format used.
* Add CLI commands for converting images and fonts.
* Add stub rules.mk for QP.
* Add stream type.
* Add base driver and comms interfaces.
* Add support for SPI, SPI+D/C comms drivers.
* Include <qp.h> when enabled.
* Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789.
* Add support for GC9A01.
* Add support for ILI9341.
* Add support for ILI9163.
* Add support for SSD1351.
* Implement qp_setpixel, including pixdata buffer management.
* Implement qp_line.
* Implement qp_rect.
* Implement qp_circle.
* Implement qp_ellipse.
* Implement palette interpolation.
* Allow for streams to work with either flash or RAM.
* Image loading.
* Font loading.
* QGF palette loading.
* Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images.
* Image drawing.
* Animations.
* Font rendering.
* Check against 256 colours, dump out the loaded palette if debugging enabled.
* Fix build.
* AVR is not the intended audience.
* `qmk format-c`
* Generation fix.
* First batch of docs.
* More docs and examples.
* Review comments.
* Public API documentation.
* CLI: Bump the 'jsonschema' version
Update the used meta-schema from Draft 7 from 2018 to the latest one,
Draft 2020-12.
Currently, the validator falls back to Draft 7 if the newer validator is
not available. Draft 2020-12 support was introduced to 'jsonschema' in
version 4.0.0.
* Fix formatting
* Add frameworking for development board presets
* Update lib/python/qmk/info.py
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* CLI: Lint non-data driven macros in info.json
Macros in info.json should either have the "matrix" key with the matrix
data or should should be also present in <keyboard>.h
* Add verification of matrix data
* Use generic '<keyboard>.h' in output
* Add keyboard name to output
* Make C layout macro finding more robust
The old code missed C macros if they had whitespace between '#' and
'define' or had whitespace before '#'.
The 'cd' subcommand was failing as the current shell's Windows path was
mangled while milc processed it.
Using 'subprocess' directly avoids this issue and an extra layer of
subshell.
* Fix schema validator
It should use the passed schema.
* Add required attributes to keymap schema
* Rework subcommands to validate the JSON keymaps
The 'compile', 'flash' and 'json2c' subcommands were reworked to add
JSON keymap validation so error is reported for non-JSON and
non-compliant-JSON inputs.
* Fix required fields in keymap schema
* Add tests
* Fix compiling keymaps directly from keymap directory
* Schema should not require version for now.
* Changelog.
* Remove the asymmetric encoder PR from listing due to revert.
* More docs
* More docs
* More docs
* Links to changelog, updated schedule, slotted in 2 weeks of testing at the end so that there's no ambiguity with PR merge dates.
* Clarify keyboard moves.
* Fix dates
* Sidebar
* Fixup dates.
* Fixup dates.
* Wording.
* macros in json keymaps
* add advanced macro support to json
* add a note about escaping macro strings
* add simple examples
* format json
* add support for language specific keymap extras
* switch to dictionaries instead of inline text for macros
* use SS_TAP on the innermost tap keycode
* add the new macro format to the schema
* document the macro limit
* add the json keyword for syntax highlighting
* fix format that vscode screwed up
* Update feature_macros.md
* add tests for macros
* change ding to beep
* add json support for SENDSTRING_BELL
* update doc based on feedback from sigprof
* document host_layout
* remove unused var
* improve carriage return handling
* support tab characters as well
* Update docs/feature_macros.md
Co-authored-by: Nick Brassel <nick@tzarc.org>
* escape backslash characters
* format
* flake8
* Update quantum/quantum_keycodes.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Add developer-only command for exporting the list of PRs associated with a merge to `develop`.
* qmk pytest
* Imports.
* Remove dependencies from requirements file, manually handle.
* Reduce complexity, qmk generate-api taking too long so relying on CI
* CLI: Add 'cd' subcommand
Go to your qmk_firmware dir with ease.
* Fix for Windows and do not run if already under QMK Home
* Make flake8 happy
* Fix prompt for Windows
* Make flake8 happy once again
* I'll get it right eventually
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add subcommand to __init__.py and fixup after rebase
* Update Windows code to use milc's run
* Unify the subshell starting with os.execl
* Exit with error msg when output is redirected to non-TTY.
* Revert Windows-specific code
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use copy_tree from distutils for python 3.7 support
* Bump python version in docs
* Changed new-keyboard to use printf-style format strings
* Use username for manunfacturer / maintainer
* Update lib/python/qmk/cli/new/keyboard.py
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: Zach White <skullydazed@drpepper.org>
* Add support for RISC-V builds and GD32VF103 MCU
* Add toolchain selection in chibios.mk based on the mcu selected in
mcu_selection.mk
* Reorder and added comments to chibios.mk to have a streamlined makefile
* Add GD32VF103 mcu to possible targets for QMK.
* Add STM32 compatibility for GD32VF103 MCU, this is hacky but more efficent
then rewriting every driver.
* Add GigaDevice DFU bootloader as flash target, please note that
dfu-util of at least version 0.10 is needed.
* Add analog driver compatibility
* Add apa102 bitbang driver compatibility
* Add ws2812 bitbang driver compatibility
* Add eeprom in flash emulation compatibility
* Allow faster re-builds with ccache
* Add SiPeed Longan Nano to platform files
* Add SiPeed Longan Nano Onekeys
* Make quine compatible with other bootloaders
* Support builds with picolibc
* Add risc-v toolchain to arch and debian/ubuntu scripts
* pulled source from dev branch
* missed a file from origin
* formatting
* revised argument names. relaxed matching rules to work for avr too
* add docstrings
* added docs. tightened up regex
* remove unused imports
* cleaning up command file. use existing qmk dir constant
* rename parser library file
* move lib functions into command file. there are only 2 and they aren't large
* currently debugging...
* more robustly find config
* updated docs
* remove unused imports
* reuse make executable from the main make command
* pulled source from dev branch
* missed a file from origin
* formatting
* revised argument names. relaxed matching rules to work for avr too
* add docstrings
* added docs. tightened up regex
* remove unused imports
* cleaning up command file. use existing qmk dir constant
* rename parser library file
* move lib functions into command file. there are only 2 and they aren't large
* currently debugging...
* more robustly find config
* updated docs
* remove unused imports
* reuse make executable from the main make command
* remove MAKEFLAGS from environment for better control over process management
* Update .gitignore
Co-authored-by: Michael Forster <forster@google.com>
* add a usage line to docs
* doc change as suggested
Co-authored-by: Nick Brassel <nick@tzarc.org>
* rename command
* remove debug print statements
* generate-compilation-database: fix arg handling
* generate-comilation-db: improve error handling
* use cli.run() instead of Popen()
Co-authored-by: Xton <cdewan@apple.com>
Co-authored-by: Christon DeWan <cmdpix@mac.com>
Co-authored-by: Michael Forster <forster@google.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Add config.h and rules.mk support for data driven keymaps
* tidy up after rebase
* Rename key as it can contain more than just keyboard overrides
* tidy up after rebase
* Add validation
